Category

## Estimation

Category

A little confusing thing in building construction is a design of septic tank and soak pit for the households.

The rate analysis of civil works has contains different activity like the cost of material, manpower and equipment, etc.The cost of construction activities arrives in terms of the rate per unit and the cost is arrived including of material and manpower cost.

The D²/162.2 formula is using to calculate the weight of rounded bar in Kg/m. Then how to calculate the weight of Steel plate or irregular shape? So in this post, we are going to discuss how to calculate steel bar weight and how to calculate steel plate weight.

Brick is one of the most common and traditional building material. Bricks are available in the market by different size and classification and we may choose it based on the design requirement.

The mortar prepared by adding a certain quantity of water with cement and fine aggregates. The cement mortar ratio will be different based on the work and suitable cement mortar ratio listed below.

Let’s assume a typical case where you need to concrete a floor for that day.  You have to instruct the labourers to bring the required materials from the stock room for the day or you need to buy materials from the store. In these two scenarios, you need…

We are going to estimate the required material quantity for Area – 10m2, Thickness of Mortar – 15mm (0.015m) and the Mortar Ratio – 1:3. So in dry conditions, we have to take 30 to 35% sand bulkage and add 20% for wastage.

We find out the volume of concrete in wet condition 1m3 (After the consolidation of Cement+sand+water). So in dry conditions, we have to add 30 to 35% sand bulkage and add 20% for wastage.