What is Shotcrete Technology?

We shall pour concrete in particular structural element by hand mix or ready-mix concrete. The shotcrete concrete is not one of those types of concrete.

Must Read: Properties of Concrete

Shotcrete Technology

By applying high-velocity pressure the concrete sprayed on a horizontal or vertical surface of structure through a nozzle is called Shotcrete concrete or a gunite concrete.

Sometimes instead of concrete, the mortar will also be applied on the structural surface.

Must Read: How to Calculate Steel Weight for reinforcement

Shotcrete Concrete Mix Design

  • The mix ratio for shotcrete concrete is the same as what we use in conventional concrete.
  • The mixing material and water-cement ratio may change since the shotcrete mostly used in the waterlogged area or seashore.
  • The concrete mix design may change as per the requirement where it would be used!
  • The components of the concrete mix shall be weight-batched before mixing by a proper weight watcher. Batch shall be based on the weight of single components with accuracy within ±1.0% of the values corresponding to the selected type of mix.

Reinforcement for shotcrete concrete

The reinforcement for shotcrete concrete depends upon the purpose of use because sometimes steel fabric wire will be used as reinforcement. Mostly TMT will be used as reinforcement.

When the shotcrete concrete applying in MS pipe, 13 gauge or 14 gauge steel fabric wire will be used as reinforcement.

Shotcrete Procedure

  • After selection of right materials, the material collected and dumped into the material pit of the shotcrete machine.
  • The material mixed in dry condition and thereafter required water will be mixed.
  • At right velocity, the concrete will be sprayed eventually on the specified surface.
  • After spraying the concrete the surface levelled uniformly.

Uses of Shotcrete

  • It is very effective in repair and rehabilitation works. 
  • We can pour concrete either on a horizontal or vertical surface.
  • Mostly shotcrete used to construct a retaining wall where the soil is very loose.
  • The shotcrete concrete is mainly used in underground oil line or water pipeline where the pipe is buried under the earth to avoid the pipe corrosion.
  • To avoid internal damages of the surface.

Advantages and Disadvantages of Shotcrete

Advantages of Shotcrete concrete

  • It can reduce manpower.
  • Minimal formwork only required.
  • Economically good compared to the conventional concrete.
  • We can easily control the water-cement ratio.
  • Cost friendly for the repair and rehabilitation work.

Disadvantages of Shotcrete concrete

  • Material wastage may high compared to the conventional concrete method.
  • High skill manpower required to do the job.
  • The concrete smooth finishing work is a little complicated.

Must read: How to calculate the Concrete Material calculation

Bala

Bala is a Planning Engineer & he is the author and editor of Civil Planets.

Share
Published by
Bala

Recent Posts

Uses of Surveying

Before starting any civil engineering work, regardless of branches, horizontal, vertical, and angular measurements of…

2 years ago

Importance of Surveying

The data measurements gathered from surveying helps establish the plan and design of all civil…

2 years ago

What is Surveying?

Surveying is the art and science of civil engineering that determines the relative (comparable) position…

2 years ago

What is Grouting? – Types & Applications

The formation of cracks on the concrete surface may lead to reduce the durability of…

3 years ago

Difference Between Plinth Level, Sill Level, and Lintel Level

Understanding the different levels of structure seems a bit of a daunting task. Don’t worry…

4 years ago

What is Prestressed Concrete Pipe?

We knew that pipes are used to transport gas or liquid substance from one place…

4 years ago