The aggregates used in different construction works such as roads, buildings, pavement etc.
So many different kinds of tests are applied on coarse aggregates such as the impact values test, crushing value test, specific gravity test, and sieve analysis test to know its strength.
The abrasion test is conducted on the aggregates to know its toughness and resistance such as crushing, degradation and disintegration. It is more like a Charpy impact test for metal toughness.
It is conducted in three different methods.
Here we are going to discuss the Los Angeles abrasion test method, which is widely used to determine the abrasion resistance of the coarse aggregates.
Abrasion is nothing but grinding motion of materials against each other.
Road pavement aggregates are subjected to Los Angeles abrasion tests. Since the road is subjected to continuous motion pressure by vehicles, it may disintegrate the aggregates into small particles due to the heavy abrasion on the road surface.
The aggregate particles of the road surface become dust due to the abrasion, and it disturbs the vehicle driving. Moreover, it may lead to accidents. So it should sustain against motion pressure and should not disintegrate.
A certain weight of steel ball and the coarse aggregate specimen will be mixed and placed in a drum. Then it would be rotated for a certain number of revolutions.
The percentage of wear loss of aggregate specimens rubbed by the abrasive steel balls is known as abrasion value. The Los Angeles abrasion test method and apparatus specification have been mentioned in IS code 2386 Part 4.
Different sizes of aggregates are used for different road construction works. Based on grain size, the sample weight will be taken as a specimen for the test.
Sieve size | Test Sample Aggregate Weight in gm | |||||||
Passing (mm) | Retained on (mm) | A | B | C | D | E | F | G |
80 | 63 | 2500* | ||||||
63 | 50 | 2500* | ||||||
50 | 40 | 5000* | 5000 | |||||
40 | 25 | 1250 | 5000 | 5000* | ||||
25 | 20 | 1250 | 5000* | |||||
20 | 12.5 | 1250 | 2500 | |||||
12.5 | 10 | 1250 | 2500 | |||||
10 | 6.3 | 2500 | ||||||
6.3 | 4.75 | 2500 | ||||||
4.75 | 2.36 | 5000 |
The number of abrasive steel balls chosen for the test is related to the gradation of the aggregate mentioned in the below table.
Grading of Aggregates | No of Steel balls | Weight of Steel ball in gm. |
A | 12 | 5000 ± 25 |
B | 11 | 4584 ±25 |
C | 8 | 3330 ± 20 |
D | 6 | 2500 ± 15 |
E | 12 | 5000 ± 25 |
F | 12 | 5000 ± 25 |
G | 12 | 5000 ± 25 |
Abrasion Value Calculation
Abrasion Value = (W1-W2/W1) x 100
W1 – Weight of Dried Aggregate Sample
W2 – Weight of aggregate sieved through the IS 1.70mm.
Minimum two samples have to be tested from the same batch and average the value as the Abrasion value of the aggregate.
Grade of Aggregate | Description | Sample 1 | Sample2 |
Weight of Dried Aggregate Sample w1 | |||
Weight of aggregate sieved through the IS 1.70mm W2 | |||
Percentage Wear (W1-W2/W1) x 100 |
The limitation of abrasion value for different aggregate has been mentioned in below table as per the recommendation of Indian Roads Congress.
# | Type of Pavement | Max. permissible abrasion value of aggregates in % |
1 | Water bound macadam, sub-base course | 60 |
2 | WBM base course with the bituminous surfacing | 50 |
3 | Bituminous bound macadam | 50 |
4 | WBM surfacing course | 40 |
5 | Bituminous penetration macadam | 40 |
6 | Bituminous surface dressing, cement concrete surface course | 35 |
7 | Bituminous concrete surface course | 30 |
Happy Learning 🙂
Before starting any civil engineering work, regardless of branches, horizontal, vertical, and angular measurements of…
The data measurements gathered from surveying helps establish the plan and design of all civil…
Surveying is the art and science of civil engineering that determines the relative (comparable) position…
The formation of cracks on the concrete surface may lead to reduce the durability of…
Understanding the different levels of structure seems a bit of a daunting task. Don’t worry…
We knew that pipes are used to transport gas or liquid substance from one place…