Categories: Construction

Difference between Nominal Mix and Design Mix

During the initial days, we would all think that the concrete nominal mix and design mix are the same except the quantity of requirement. If we need a higher amount of concrete, we will go for the RMC design mix. If we need less amount of concrete mix, we will go for Site Mix (Nominal Mix).

That’s how I thought 🙂

After some time, we would learn that these two are distinct by their proportions. One is Volumetric, and another one is the mass or weight proportions.

But there are many more differences.

What is a Nominal Mix?

Nominal Mix Concrete is a volumetric mixture that does not care about the individual properties of the ingredients (Cement, Sand, Coarse Aggregate). We simply measure the volume (using measuring box) of ingredients and make a proportion of it.

It is okay for small scale construction where there are no critical load applications, and the load does not require more than M20 ratio concrete.

These do not guarantee any kind of durability and strength for the structure. Why? Because up to a certain point, we can use the proportions and can achieve only up to 20 N/mm2 strength. 

If you carefully watch the proportions of Nominal Mix, it would be done up to a specific whole number.

Grade of concrete Mix Ratio
M5 1:5:10
M7.5 1:4:8
M10 1:3:6
M15 1:2:4
M20 1:1.5:3

What is the Design Mix?

Design Mix Concrete is opposite on the other hand. The name itself suggests that it is carefully designed by weight proportions. 

It ensures the quality of ingredients by implying the multiple numbers of lab tests to study their characteristics such as specific gravity, Initial and Final setting time, abrasion resistance test, silt content test, and much more.

If you carefully watch the weight proportions, it will be in digits which is hard to achieve at the site.

Experts at the Design Mix field carefully follow the procedure to know the source of the aggregates and the characteristics of them. Based on that, they will start to design the mix to achieve a specific strength. 

They formulate different proportions based on the trial mixes. They cast the concrete cubes and test them for their characteristic strength.

Once they achieve the desired strength based on the acceptance criteria, they save the formula and use it for the consecutive mixes. But understand, they change these design mixes every time when they change the aggregate sources.

Difference between Nominal Mix and Design Mix

Nominal Mix Concrete Design Mix Concrete
Arbitrary Volumetric Proportions Weight Proportions
IS:456–2000 (Cl. 9) IS: 10262
Fixed Ratio (Ex. 1:1.5:3) No Fixed Ratio. Based on the requirement, it would change.
Concrete strength varies every time because of volumetric proportions Concrete strength never vary because of controlled design mix calculations
It is prescriptive (assumption) based concrete It is performance-based concrete
Individual characteristics of aggregates will not be considered Individual characteristics of aggregates will be considered
Aggregates will not be subjected to tests Series of lab tests will be conducted to study the characteristics of aggregates
Suitable for lower grade concrete Ideal for Higher Grade concrete
The casting of trial mixes is rare. Trial Mixes will be cast every time.
Entrapped air content would be considered Entrapped air content considered according to the size of the aggregates.
Low Quality Control High Quality Control
Water cement ratio will differ based on guidance Water cement ratio will vary based on the performance of trial mixes
Used up to M20 Concrete Mix Used for High grade concrete (above M20)

Happy Learning 🙂

Bala

Bala is a Planning Engineer & he is the author and editor of Civil Planets.

Share
Published by
Bala

Recent Posts

Uses of Surveying

Before starting any civil engineering work, regardless of branches, horizontal, vertical, and angular measurements of…

2 years ago

Importance of Surveying

The data measurements gathered from surveying helps establish the plan and design of all civil…

2 years ago

What is Surveying?

Surveying is the art and science of civil engineering that determines the relative (comparable) position…

2 years ago

What is Grouting? – Types & Applications

The formation of cracks on the concrete surface may lead to reduce the durability of…

3 years ago

Difference Between Plinth Level, Sill Level, and Lintel Level

Understanding the different levels of structure seems a bit of a daunting task. Don’t worry…

4 years ago

What is Prestressed Concrete Pipe?

We knew that pipes are used to transport gas or liquid substance from one place…

4 years ago