We are using many types of cement to make an excellent concrete which withstands any possible failure situation by the types of loads acting on the structure.
But it’s not a single thing that assists the concrete to make it great. There are a set of properties…
Here we are going to discuss the same.
Let’s discuss
Concrete is a blended material of cement, sand, water, and coarse aggregate or lightweight material.
Concrete will have a different set of properties on its semi-liquid and hardened form. Both properties will impact the end result. So let’s discuss both.
Properties of Fresh Concrete ensures that the concrete is
The ability to handle and place the concrete and compact without segregation and bleeding is called the workability of concrete. The workability of concrete depends on the quality of material, proper mixing, and water-cement ratio. We can measure the workability of concrete by the Slump Test.
Water surfacing on the freshly laid concrete when compacting is known as concrete bleeding. The concrete bleeding happens due to the excessive compaction or too much water-cement ratio in the concrete mix.
It creates the pores in the concrete and makes it weak. The quality of material, water-cement ratio, and proper compaction will avoid the bleeding.
The separation of aggregates from the fresh concrete, which results in non-uniformity, is called segregation. Due to the segregation activity, concrete honeycombs may form and decrease the strength of the concrete.
When the finished concrete surface is not smooth even after trying with a hand trowel is known as the harshness of concrete. This is the result of improper grading and less cement mortar mix. We have to ensure to use proper mix ratio
Properties of hardened concrete ensure the
I hope this is the only test that most of us would remember studying in college.
The strength of concrete is nothing but the concrete’s resistance capacity to bear the compression load after it has hardened. The strength of concrete will gradually increase from day one and attains its max strength on day 28.
Days | Percentage of Strength |
Day 1 | 16% |
Day 3 | 40% |
Day 7 | 65% |
Day 14 | 90% |
Day 28 | 100% |
The grade of concrete and other properties will impact the characteristic strength of hardened concrete.
The compressive strength of concrete depends on the following factor
Generally, the tensile strength of concrete will be 10 to 12 % of its compressive strength.
The durability of concrete is the resistance capacity against environmental conditions like weathering,
It is better to ensure that we are using a proper mix and sufficient compaction to enhance durability.
The shrinkage of concrete depends upon the components, such as the size of the member and weathering conditions also because of the delayed curing. The approx value of the shrinkage strain is 0.0003 as per the IS code 1343.
We have discussed this topic (Shrinkage of Concrete) in detail.
The inelastic deformation of concrete while applying the compression load is called a creep of concrete. The Stress in concrete should not exceed 1/3rd of its compressive strength.
Age at Loading | Creep Co-efficient |
7 Days | 2.2 |
28 Days | 1.6 |
1 Year | 1.1 |
The dimensional changes in concrete may happen due to the shrinkage, plasticity, and creep of concrete. The dimensional changes may lead to the formation of the crack.
Before starting any civil engineering work, regardless of branches, horizontal, vertical, and angular measurements of…
The data measurements gathered from surveying helps establish the plan and design of all civil…
Surveying is the art and science of civil engineering that determines the relative (comparable) position…
The formation of cracks on the concrete surface may lead to reduce the durability of…
Understanding the different levels of structure seems a bit of a daunting task. Don’t worry…
We knew that pipes are used to transport gas or liquid substance from one place…
View Comments
Good project
Send me pdf this project
Thank you