Many innovations are evolving in the construction industry to enhance the strength and durability of the structure.
Concrete, A major construction material that is strong in compression and weak in tensile load. So the steel reinforcement has been embedded to stabilize the concrete against the tensile force.
Though the reinforced cement concrete is strong in both, there is a possibility of crack occurrence on the concrete surface by anyone of the following reasons.
Different types of special concrete are used for works such as coastal protection structures, power plants, etc.. However, the self-healing concrete (SHC) is a unique innovation.
Cracks may occur on the concrete surface after completion of the structure. The moisture content seeps into the concrete surface through a small crack and corrodes the steel and will lead to a collapse of the entire structure.
The SHC gives solutions for the crack rectification in a natural way.
Usually, the cracks which appear on the concrete surface will be repaired by either applying cement paste, or by penetrating cement grout or epoxy grout.
The cracks on the concrete surface that heal themselves with the help of environmental moisture and air by producing a lime layer is called self-healing concrete.
We know that the cement contains lime particles. Generally, 20 to 30% of cement will not hydrate in concrete. That non-hydrated cement will hydrate when cracks formed on the concrete surface.
The lime particles present in cement now react with the environmental moisture and fill up the fine cracks. The cracks may fill automatically when the width of the crack ranges between 0.05mm to 0.1mm. When the width of the cracks goes beyond 0.1mm, then other types of repair method is required.
Bacterias are used in the self-healing of cracks that happen on concrete surfaces.
As above said, the self-healing concrete develops lime particles when the cement reacts with the natural moisture to heal the crack.
A special bacteria from the bacillus family, calcium, nitrogen, and phosphorus are mixed with the concrete ingredients to make the bacterial concrete.
Those bacterias can live inactive in concrete over 200 years in dry conditions and the bacterias act as a healing agent.
The self-healing bacterias are selected from a particular family.
The bacillus bacteria and calcium lactate will be mixed with the concrete ingredients. The bacteria spores grow and consume the oxygen to feed the calcium lactate.
When water seeps into the crack and reacts with bacteria, the calcium lactate produces the lime which will transform as a hardened limestone layer to heal the crack.
The following two methods are used for bacterial concrete.
In this method, the specific bacteria spores and calcium lactate directly mixed with the other concrete ingredients. It will not affect the concrete properties.
When the water molecules seep through cracks, then the bacteria react with the oxygen and form the limestone layer to heal the crack.
This method is expensive compared to the direct mix method. The bacteria and the calcium lactate inserted in clay pellets. The clay pellets are mixed with the concrete in the ranges between 5% to 8%.
When the cracks appear on the concrete surface, the clay pellets will burst, and the bacteria spores eat the calcium lactate and produce the hardened limestone to seal the crack.
As discussed earlier, generally 20% to 30% of cement in concrete would not be hydrated. So when water comes into contact with the crack, the unhydrated calcium reacts with the water and produces calcium hydroxide. Here the bacteria act as a catalyst to induce the chemical reaction.
The calcium hydroxide reacts with the environmental carbon dioxide and forms the limestone to seal the crack.
The structure may stand beyond its life span by using bacterial concrete. The cement will emit 7% to 9% of carbon dioxide during the production. By using self-healing concrete, the usage of cement and concrete will be reduced, and it is beneficial to reduce environmental pollution.
The compressive strength and tensile strength of the self-healing concrete is 10% to 20% higher than the standard concrete.
Happy Learning 🙂
Before starting any civil engineering work, regardless of branches, horizontal, vertical, and angular measurements of…
The data measurements gathered from surveying helps establish the plan and design of all civil…
Surveying is the art and science of civil engineering that determines the relative (comparable) position…
The formation of cracks on the concrete surface may lead to reduce the durability of…
Understanding the different levels of structure seems a bit of a daunting task. Don’t worry…
We knew that pipes are used to transport gas or liquid substance from one place…